Peristaltic Pump - Perfect for Industrial Use
Discover the Great Value of our Peristaltic Pumps!
Benefits at a Glance:
|
 |
Specific Information about our Peristaltic Pump:
|
Ports Right Hand Side
The IP Series peristaltic pump may be adapted to existing installations by modification of the port configuration. This only requires the relocation of the stainless steel pipe connections on the suction and discharge side of the vacuum system to suit the desired condition. This can be done without additional machining. |
How It Works
The rotor rotates within the pumps housing filled with lubricant and compresses the pumping hose with the sliding shoe (1). This process generates a hermetic separation between suction and discharge side. |
Many Different Applications for our High Quality Peristaltic Pumps
Peristaltic Pump Capacity - Model IP100 - IP800
*Duplex units are also available for higher flow rates.
Selection Diagrams for IP100 - IP800
 |
At a media temperature >40° C, hose life is shortened and a speed reduction should be considered.
|
Short-time operation (max. 4 hours)
Intermittent operation (max. 12 hours)
Continuous operation (24 hours)
Peristaltic Pumps Engineered Drawings
Peristaltic Pump Hose Material
 |
Natural rubber (NR) technical and FDA approved for food application
Composition: natural substance, high-polymer isoprenes
Properties: tension-resistant, elastic, cold-resistant, approved for food applications
Operative Range: for abrasive media, diluted acids and alkalis
Temperature range: -20°C - +80°C
Nitrile rubber (NBR)
Composition:mixed polymeride from butadiene and acryl nitrile
Properties: wear-resistant, grease and oil resistant
Operative Range: for oily and greasy media, alcohols
Temperature range: -10°C - +80°C
Butyl rubber (IIR)
Composition:mixed polymeride fromiso butadiene and isoprenes
Properties: heat resistant and non-aging, gas-tight
Operative Range: for organic and inorganic acids and alkalis, ketones and hot water
Temperature range: -25°C - +80°C
Hypalon (CSM)
Composition: elastomer formed through polymerisation of chlorosulfonated ethyls
Properties: chemical resistant and wear resistant
Operative Range: for acids and alkalis, colours
Temperature range: -20°C - +80°C
EPDM (EPDM)
Composition: EPDM rubber through copolymerisation of ethyl, propylene and diene
Properties: chemical resistant, good insulating properties and outside applications
Operative Range: for acids and alkalis, hot water
Temperature range: -30°C - +80°C
Peristaltic Pumps Early Warning System
 |
 |
 |
The patented early warning system (see illustrations 2 and 3) works as follows:
Each hose is provided with a small additional channel through which the air in the upper section of the pumping chamber is evacuated from the pump housing. Therefore, a vacuum is formed in the sealed aluminum housing. In the case of damage or normal wear of hose, the vacuum will drop.
The early warning can be seen through the installed vacuum gauge. An acoustic or optical signal can be activated by using the vacuum switch (see illustration 1).
By this the hose condition is monitored for optimum service planning.
Downtimes through normal wear can be predicted.
For more information on our high quality peristaltic pumps please Contact Us.